LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2023 >> 300 C >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Electronic Control Modules (Service Information) >> Module, Adaptive Cruise Control (Acc) >> Removal >> Module And Bracket
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Module And Bracket

  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Raise and support the vehicle.
  3. Remove the front fascia from the vehicle. Refer to FASCIA, FRONT, REMOVAL .
    GC0170255Courtesy of CHRYSLER GROUP, LLC
  4. Disconnect the wiring harness connector (1) from the Adaptive Cruise Control (ACC) module.
  5. Remove the energy absorber from the vehicle.
    GC0170147Courtesy of CHRYSLER GROUP, LLC
  6. Remove the fasteners (2) securing the mounting bracket (1) to the front bumper support bar.
  7. Remove the mounting bracket from the front bumper support bar.
scientia non olet · About LEMON Manuals