LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2023 >> 300 C >> Repair and Diagnosis >> Body & Frame >> Windows >> Power Windows (Service Information) >> Motor, Window Regulator >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Motor, Window Regulator: Installation

GC0144826Courtesy of CHRYSLER GROUP, LLC
NOTE:

The power window motor may need to actuated momentarily to line up the gear in the drive assembly with the regulator.

  1. Connect the power window motor wire harness connector (3).
  2. Position the power window motor and gear assembly (1) on the carrier plate, aligning the drive gear with the regulator.
  3. If necessary, temporarily connect the window switch assembly and battery to actuate the motor.
  4. Install and tighten the fasteners (2) that secure the power window motor and gear assembly to the carrier plate.
  5. Install the door interior trim panel. Refer to PANEL, DOOR TRIM, INSTALLATION for the appropriate procedure. Refer to PANEL, REAR DOOR TRIM, INSTALLATION .
  6. Connect the negative battery cable.
  7. Perform the Clear/Relearn procedure. Refer to STANDARD PROCEDURE .
scientia non olet · About LEMON Manuals