Select Module Menu

Menu will display body control systems available for technician to diagnose. Select appropriate body system to be tested. DRB-II will then display a menu for specific system being tested. Following functions are accessible from each system menu:

• System Tests  This function allows technician to determine whether Single Board Engine Controller (SBEC) is active over CCD bus.
• Read Faults  This functions allows technician to read faults. If no faults exist, NO FAULTS DETECTED will be displayed. If faults exist, DRB-II will display number of faults, fault code and message.
• State Display  This functions allows technician to read states or values of a variety of sensors, inputs/outputs and components.
• Actuator Tests  This function allows technician to activate various outputs, motors and relays to test their operation.
• Adjustments  This function allows the technician to change vehicle theft alarm system mode from disarmed to armed, or to put alarm system in self-diagnostics mode. Adjustments function is not available for testing of other body control modules.