Cruise Control Switch: Testing and Inspection

Fig. 6 Speed Control Continuity Chart. 1988-90 Rear Wheel Drive Models:

Fig. 7 Speed Control Continuity Chart. 1988-90 Front Wheel Drive Models:

Fig. 8 Speed Control Connector Terminal Identification:

Fig. 9 Speed Control Continuity Chart. 1991 Models:

1. Disconnect the blade type four wire electrical connector from base of steering column.
2. Using a continuity tester, or an ohmmeter, check for continuity at connector wires. Do not use a test light.
3. Results should be obtained according to the charts. If these results are not obtained, replace switch.