LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 1993 >> Intrepid Base, 3.5 F >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Ignition System >> Distributor >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Ignition System: Distributor: Installation

  1. Ensure piston No. 1 is still at TDC of compression stroke. Install distributor. Ensure distributor "O" ring is properly seated on engine block. To complete installation, reverse removal procedure.
  2. Adjust ignition timing. See appropriate ADJUSTMENTS article in the ENGINE PERFORMANCE Section. Tighten distributor bolt.
Fig 1: Exploded View Of Distributor (3.0L)
G90E13312Courtesy of CHRYSLER CORP.
scientia non olet · About LEMON Manuals