LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 1993 >> Stealth Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Engine Controls - System/Component Tests) >> Computerized Engine Controls >> Control Unit >> Power Circuits
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Power Circuits

WARNING: This page is about a different car, the 1994 Mitsubishi 3000GT and 1994 Dodge Stealth. However, it is still accessible from the selected car via links, so may be relevant.

Turn ignition on. Check for battery voltage on ECM power terminals. See POWER TERMINAL IDENTIFICATION  table. If battery voltage is not present, check operation of MFI relay. See RELAYS  under MOTORS, RELAYS & SOLENOIDS.

Fig 1: Identifying ECM Connectors
G94F44292Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
GROUND TERMINAL IDENTIFICATION

Application ECM Terminals No.
All Models 13 & 26
POWER TERMINAL IDENTIFICATION

Application ECM Terminals No.
All Models 12 & 25
ENGINE CONTROL MODULE (ECM) LOCATION

Application Location
Stealth & 3000GT Behind Center Console