LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 1997 >> Grand Caravan Base, 2.4 B >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes - 2.4L >> Self-Diagnostic System >> Retrieving Diagnostic Trouble Codes >> Using Scan Tool
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Using Scan Tool

  1. Ensure battery is fully charged. Attempt to start engine. Turn ignition off. Connect scan tool to Data Link Connector (DLC) located below driver's side of instrument panel. See Fig 1.
    Fig 1: Identifying Data Link Connector (DLC)
    G95J35070Courtesy of CHRYSLER CORP.
  2. Turn ignition on. Using scan tool manufacturer's instructions, record all DTCs displayed on scan tool. See SELF-DIAGNOSTIC TESTS DIRECTORY table. For additional information on retrieving DTCs, see DTC TEST under SELF-DIAGNOSTIC TESTS.
  3. Once all repairs are made, ensure DTCs are cleared from PCM. See CLEARING DIAGNOSTIC TROUBLE CODES under SELF-DIAGNOSTIC SYSTEM.
scientia non olet · About LEMON Manuals