Speed Control Switches Test
WARNING: This page is about a different car, the 1996 Eagle Vision, 1996 Dodge Intrepid, 1996 Chrysler New Yorker, 1996 Chrysler LHS, and 1996 Chrysler Concorde. However, it is still accessible from the selected car via links, so may be relevant.
Access speed control switches. Disconnect both speed control switch 2-pin connectors. Using an ohmmeter, check both speed control switches. If either speed control switch does not test as specified, replace defective switch. See SPEED CONTROL SWITCH RESISTANCE .
SPEED CONTROL SWITCH RESISTANCE
| Switch Position | Resistance (Ohms) | |
|---|---|---|
| ON/OFF & CANCEL Switch | ||
| None Depressed | 22,352-22,848 | |
| CANCEL | 0.0-0.5 | |
| ON/OFF | 653-668 | |
| SET/RESUME Switch | ||
| None Depressed | No Continuity | |
| SET | 1978-2022 | |
| RESUME | 5558-5682 | |