Power Door Lock Test 11A - Remote Keyless Entry (RKE) Malfunction

NOTE: Perform POWER DOOR LOCK TEST 1A before proceeding with this test. For connector terminal identification, refer to CONNECTOR IDENTIFICATION . For wiring diagrams, refer to WIRING DIAGRAMS . Perform, after each repair, VERIFICATION TEST VER-1A - BODY VERIFICATION TEST .

To test the transmitter, obtain a known good transmitter. Using scan tool, select BODY, then BODY COMPUTER. Select MISCELLANEOUS, then RKE FOB test. Press lock or unlock button on transmitter. If RKE responds correctly, replace and program new transmitter. If RKE is inoperative or does not operate correctly, replace RKE module and program all transmitters. To program the transmitter, go to POWER DOOR LOCK TEST 11B . If the horn chirp is inoperative, refer to POWER DOOR LOCK TEST 11C . To cancel horn chirp or change decklid to single button operation, see vehicle owner's manual.