SKIM Theft Alarm
- Connect DRBIII(R) to data link connector. Go to Theft Alarm, SKIM, Misc. and place SKIM in secured access mode, by using appropriate PIN code for this vehicle. Select Update Secret Key data, data will be transferred from SKIM to PCM (This is required to allow vehicle to start with new PCM).
- If three attempts are made to enter secured access mode using incorrect PIN, secured access mode will be locked out for one hour. To exit this lock out mode, leave ignition key in Run/Start position for one hour. Ensure all accessories are turned off. Also monitor battery state and connect a battery charger if necessary.