LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2003 >> Viper >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Fuel Injection >> Crankshaft Position Sensor >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Crankshaft Position Sensor: Installation

  1. Slide the sensor into the hole.
  2. Install and tighten the mounting bolt to 11 N.m (95 in. lbs.) torque.
  3. Connect the electrical connector to the sensor and lock.
scientia non olet · About LEMON Manuals