Toe Pattern Preparation

Before toe pattern can be inspected, vehicle design height, suspension settings and design bushing position must be checked. Ensure the following:

1. Verify that all fluid reservoirs and fuel tank are full.
2. Position vehicle on a known level surface (suspension or frame alignment rack).
3. Remove all objects from vehicle that were not installed at assembly plant.
4. Inflate tires to specification found on tire inflation sticker on left door end frame.
5. Remove 4 bolts and detach belly pan from exhaust shield. Remove 20 bolts and belly pan from frame.
6. Verify vehicle design height, caster, camber and toe settings are within specifications.