Specifications Index
DURANGO SPECIFICATIONS INDEX
| System | Specification/Procedure | ||
|---|---|---|---|
| Air Conditioning | |||
| Service | A/C SYSTEM | ||
| Torque | Torque specifications are within text of article. HVAC - SERVICE INFORMATION | ||
| Axle Nut/Hub Nut | |||
| Front | 185 Ft. Lbs. (251 N.m) | ||
| Rear | N/A | ||
| Battery | N/A | ||
| Brakes | |||
| Bleeding Sequence | |||
| With ABS | ABS BRAKE BLEEDING | ||
| Without ABS | STANDARD PROCEDURE | ||
| Disc Brakes | BASE BRAKE | ||
| Torque | TORQUE CHART | ||
| Charging | |||
| Generator | GENERATOR RATINGS | ||
| Torque | TORQUE - CHARGING SYSTEM | ||
| Drive Belts | |||
| Adjustment | N/A | ||
| Belt Routing | |||
| 3.7L/4.7L | INSTALLATION - 3.7L & 4.7L | ||
| 5.7L | INSTALLATION - 5.7L | ||
| Engine Cooling | |||
| General Service Specifications | FILL VOLUMES | ||
| Radiator Cap Pressure | 19-23 psi | ||
| Thermostat R & I | THERMOSTAT-ENGINE COOLANT | ||
| Water Pump R & I | PUMP-WATER | ||
| Engine Mechanical | |||
| 3.7L | |||
| Compression | CYLINDER COMPRESSION PRESSURE | ||
| Oil Pressure | 4 psi at idle, 25-110 at 3000 RPM | ||
| Overhaul | SERVICE INFORMATION - 3.7L | ||
| Torque | TORQUE | ||
| 4.7L | |||
| Compression | DIAGNOSIS AND TESTING - CYLINDER COMPRESSION PRESSURE | ||
| Oil Pressure | 7 psi at idle, 35-105 psi at 3000 RPM | ||
| Overhaul | SERVICE INFORMATION - 4.7L | ||
| Torque | TORQUE | ||
| 5.7L | |||
| Compression | DIAGNOSIS AND TESTING - CYLINDER COMPRESSION PRESSURE | ||
| Oil Pressure | 4 psi at idle, 25-110 psi at 3000 RPM | ||
| Overhaul | SERVICE INFORMATION - 5.7L | ||
| Torque | TORQUE | ||
| Fluid Specifications | See FLUIDS under MAINTENANCE tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button. | ||
| Flywheel/Drive Plate/Flex Plate Torque | |||
| 3.7L | 70 Ft. Lbs. (95 N.m) | ||
| 4.7L | 45 Ft. Lbs. (60 N.m) | ||
| 5.7L | |||
| Flex Plate | 70 Ft. Lbs. (95 N.m) | ||
| Flywheel | 55 Ft. Lbs. (75 N.m) | ||
| Fuel System | |||
| Fuel Filter Location | MODULE-FUEL PUMP | ||
| Pressure Specification | 58 psi +/- 2 psi | ||
| Fuel Pressure Test Procedure | *CHECKING THE FUEL DELIVERY SYSTEM | ||
| Fuel Pressure Release Procedure | FUEL SYSTEM PRESSURE RELEASE | ||
| Ignition | |||
| Firing Order | |||
| 3.7L | FIRING ORDER & CYLINDER IDENTIFICATION | ||
| 4.7L | ENGINE FIRING ORDER - 4.7L V-8 | ||
| 5.7L | FIRING ORDER & CYLINDER IDENTIFICATION | ||
| Ignition Wires (Resistance) | |||
| 5.7L | SPARK PLUG CABLE RESISTANCE | ||
| Ignition Wires (Routing) | |||
| 5.7L | 5.7L V-8 | ||
| Spark Plugs | SPARK PLUGS | ||
| Starting | |||
| Starter | STARTING SYSTEM | ||
| Torque | SPECIFICATIONS - TORQUE - STARTING SYSTEM | ||
| Wheel Alignment | |||
| Adjustment Specifications | ALIGNMENT | ||
| Torque | Front TORQUE CHART Rear TORQUE CHART |
||
| Wheel & Tire | |||
| Lug Nut Torque | 125-145 Ft. Lbs. (173-193 N.m) | ||