LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2005 >> Sprinter 3500, Cab Chassis >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Injection >> O2 Sensor >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

O2 Sensor: Installation

  1. Install the oxygen sensor. See Figure.
  2. Install the heatshield and tighten fasteners to 9N.m (80 lbs. in.). See Figure.
  3. Properly position the oxygen sensor wiring harness and connect the electrical connector. See Figure.
  4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals