LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2005 >> Sprinter 3500, Cab Chassis >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Fuel Injection >> Crankshaft Position Sensor >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Crankshaft Position Sensor: Installation

  1. Position the crankshaft position sensor into the access hole and install retaining bolt.
  2. Tighten the retaining bolt to 80 lbs. in. (9 N.m). See Figure.
  3. Connect crankshaft position sensor wiring harness connector. See Figure.
  4. Connect negative battery cable.
scientia non olet · About LEMON Manuals