LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2005 >> Sprinter 3500, Cab Chassis >> Repair and Diagnosis >> Engine Performance >> Tune-Up >> Ignition Control >> Glow Plug >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Glow Plug: Installation

  1. Screw glow plug(s) into cylinder head and tighten to 12 N.m (115 lbs. in). See Figure.
  2. Connect the glow plug wiring harness connector(s)
  3. Install the engine cover.
  4. Connect negative battery cable.
scientia non olet · About LEMON Manuals