LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2007 >> Caliber L4-2.4L VIN K >> Repair and Diagnosis >> Power and Ground Distribution >> Power Interrupt Connector/Switch >> Service and Repair >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation






INSTALLATION

CAUTION: It is extremely important that the Ignition Off Draw (IOD) fuses are fully seated into the Totally Integrated Power Module (TIPM) fuse cavities. Failure to install the fuses correctly could result in erratic electrical systems behavior.

1. Remove TIPM cover.

2. Insert fuse 7/8 into the TIPM. Push fuses down until they are fully seated in the TIPM cavities.

3. Install the cover to the TIPM.
scientia non olet · About LEMON Manuals