LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2007 >> Nitro 2WD V6-4.0L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Crankshaft Position Sensor >> Service and Repair >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal






REMOVAL - 4.0L





The Crankshaft Position (CKP) sensor (6) is mounted into the right side of the transmission bellhousing. It is positioned and bolted into a machined hole.

1. Raise vehicle.

2. Disconnect sensor electrical connector.

3. Remove sensor mounting bolt (5).

4. Carefully twist sensor from transmission.
scientia non olet · About LEMON Manuals