LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2007 >> Nitro 4WD V6-4.0L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Crankshaft Position Sensor >> Service and Repair >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation






INSTALLATION - 4.0L




1. Clean out machined hole in transmission bellhousing.

2. Install sensor (6) into transmission.

CAUTION: Before tightening sensor mounting bolt (5), be sure sensor is completely flush to transmission. If sensor is not flush, damage to sensor mounting tang may result.

3. Install mounting bolt (5).

4. Connect electrical connector to sensor.

5. Lower vehicle.
scientia non olet · About LEMON Manuals