LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2008 >> Nitro 2WD V6-4.0L >> Repair and Diagnosis >> Specifications >> Mechanical Specifications >> Engine >> Cylinder Block Assembly >> System Specifications >> Torque Specifications
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Torque Specifications


Crankshaft Pulley 95 Nm (70 Ft.Lbs.)


MAIN BEARING CAPS






- Install each main cap (1) and tighten bolts finger tight.The main bearing cap bolts (2) must be tightened in the proper sequence. First the inner main cap bolts (2), secondly the windage tray bolts, lastly the main cap tie (horizontal) bolts (6).
- Install the inside main bearing cap bolts (2) and tighten to 20 Nm + 1/4 turn (15 ft. lbs. + 1/4 turn).
- Measure crankshaft end play.
- Install connecting rods and measure side clearance.
- Install windage tray. Lubricate bolts with engine oil and tighten to 27 Nm + 1/4 turn (20 ft. lbs. + 1/4 turn).



- Install the main cap tie (horizontal) bolts and tighten to 28 Nm (250 in. lbs.).

scientia non olet · About LEMON Manuals