Possible Causes
| Possible Causes |
|---|
| THROTTLE PLATE/BORE INSPECTION |
| (K124) ETC POSITIVE CIRCUIT SHORTED TO VOLTAGE |
| (K126) ETC NEGATIVE CIRCUIT SHORTED TO VOLTAGE |
| (K124) ETC POSITIVE CIRCUIT SHORTED TO THE (K126) ETC NEGATIVE CIRCUIT |
| (K124) ETC POSITIVE CIRCUIT OPEN |
| (K124) ETC POSITIVE CIRCUIT SHORTED TO GROUND |
| (K126) ETC NEGATIVE CIRCUIT OPEN |
| (K126) ETC NEGATIVE CIRCUIT SHORTED TO GROUND |
| LOW BATTERY VOLTAGE |
| ETC MOTOR/THROTTLE BODY |
| POWERTRAIN CONTROL MODULE (PCM) |
Always perform the Pre-Diagnostic Troubleshooting procedure before proceeding. See DTC-Based Diagnostics/MODULE, Powertrain Control (PCM) - Standard Procedure .