LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2012 >> Caliber SE >> Repair and Diagnosis >> Engine Performance >> Ignition System (Service Information) >> Sensor, Camshaft Position >> Removal >> Front
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Sensor, Camshaft Position: Removal: Front

Fig 1: Front Cam Sensor
GC0082374Courtesy of CHRYSLER GROUP, LLC
  1. Remove the air cleaner hose to throttle body, disconnect the inlet air temperature sensor electrical connector.
  2. Disconnect negative battery cable.
  3. Disconnect electrical connector from camshaft position sensor.
  4. Remove camshaft position sensor mounting screws.
    Fig 2: Cam Sensor
    GC0082375Courtesy of CHRYSLER GROUP, LLC
  5. Remove sensor.
scientia non olet · About LEMON Manuals