Capacitor, Ignition: Installation: Installation

Fig 1: Electrical Connector, Mounting Bolt & Ignition Capacitor

Courtesy of CHRYSLER GROUP, LLC

1. Install the ignition capacitor (2) and bolt (3). Tighten the bolt to 10 N.m (89 in. lbs.).
2. Connect the ignition capacitor electrical connector (1).
   Fig 2: Cowl Extension Silencer, Side Extensions & Fasteners

   Courtesy of CHRYSLER GROUP, LLC
3. Install the cowl extension silencer (1). Refer to SILENCER, COWL EXTENSION, INSTALLATION .
4. Connect the negative battery cable and tighten nut to 5 N.m (45 in. lbs.).