Sensor, TMAP-Intake Manifold: Removal: Intermediate
WARNING: This page is about a different car, the 2020 Dodge Charger. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
- Clean the area around the Temperature and Manifold Absolute Pressure (TMAP) sensor.
- Disconnect the TMAP sensor wire harness connector (2).
- Remove the screw (1) and the TMAP sensor.