LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2021 >> Challenger SXT, RWD >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Injection, Gas >> Sensor, TMAP-Intake Manifold >> Installation >> Throttle Outlet
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Throttle Outlet

GC0170326Courtesy of CHRYSLER GROUP, LLC
  1. Check condition of the Temperature and Manifold Absolute Pressure (TMAP) sensor O-ring seal.
  2. Clean the sealing area on the supercharger.
  3. Lubricate the TMAP sensor O-ring seal with clean engine oil.
  4. Install the TMAP sensor (1) into the supercharger. Tighten the screw (2) to the proper torque specification. Refer to FUEL INJECTION, GAS, TECHNICAL SPECIFICATIONS .
  5. Connect the TMAP sensor wire harness connector (3).
  6. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
scientia non olet · About LEMON Manuals