Throttle Position Switch (TPS)
Disconnect TPS connector and check continuity using THROTTLE POSITION SWITCH CONTINUITY table. If continuity is not as specified, adjust switch by loosening attaching screws and rotating switch. If continuity is still not within specifications, replace TPS.
THROTTLE POSITION SWITCH CONTINUITY
| Throttle Position | (1) "B" & "C" | (1) "A" & "B" | ||
|---|---|---|---|---|
| Closed | Continuity | No Continuity | ||
| Partial | No Continuity | No Continuity | ||
| Full | No Continuity | Continuity | ||
|
||||