System Controls

Cruise control switches are mounted in steering wheel on a panel containing 4 separate normally-open switches: ON, OFF, SET/COAST and RESUME/ACCEL. To engage system, push ON switch, accelerate to desired speed (more than 25 MPH) and push SET/COAST or RESUME/ACCEL switch.

System will now maintain speed until OFF switch is pushed, brake pedal is pressed or transmission is shifted to Neutral. If disengaged by brake pedal or shifting, system may be re-engaged to previously selected speed by accelerating to more than 30 MPH and momentarily pushing RESUME/ACCEL switch.

OFF position erases memory and cancels preset speed of RESUME function. A higher speed can be set by accelerating until new speed is reached, then pushing SET/COAST or RESUME/ACCEL switch. A higher speed may also be attained by pushing RESUME/ACCEL switch and holding until desired speed is reached. A lower speed can be attained by pushing SET/COAST switch, waiting until vehicle slows to desired speed, and releasing switch to maintain new speed.