LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Eagle >> 1992 >> Summit Base, 2D Hatchback, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Engine Controls - Tests W/Codes) >> Self-Diagnostic System >> Retrieving Codes >> Using Scan Tester
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Using Scan Tester

WARNING: This page is about a different car, the 1992 Mitsubishi Mirage. However, it is still accessible from the selected car via links, so may be relevant.
  1. Before entering on-board diagnostics, refer to PRETEST INSPECTION  . Turn ignition switch to OFF position. Locate self-diagnostic connector, next to fuse block. Connect power source terminal of scan tester to cigarette lighter socket.
  2. Connect scan tester to self-diagnostic connector. Turn ignition on. Read and record scan tester self-diagnosis output. Perform necessary repair. See FAULT CODES  .
scientia non olet · About LEMON Manuals