VEHICLES TESTED Mode
- This mode is used to show which vehicles are covered by DRB-II cartridge. To access vehicles tested mode, turn ignition off. Attach DRB-II to data link connector. Data link connector is located under center of dash and to the right of steering column.
- Turn ignition switch to RUN position. All DRB-II character positions will illuminate and copyright information will appear on screen for several seconds. After several seconds DRB-II menu will appear.
- At DRB-II menu, press "1" (VEHICLES TESTED) key. Press ENTER key. DRB-II will display vehicles covered by cartridge. Screen will display for 5 seconds and return to DRB-II menu. HOW TO USE Mode Enter DRB-II menu display. Refer to steps 1) and 2) under VEHICLES TESTED MODE. At DRB-II menu, press "2" (HOW TO USE) key. Press ENTER key. A series of screens will display explaining keys used to perform engine diagnostic program.