Select Module Menu

WARNING: This page is about a different car, the 1992 Dodge Dynasty, 1992 Chrysler New Yorker Fifth Avenue, 1992 Chrysler New Yorker, and 1992 Chrysler Imperial. However, it is still accessible from the selected car via links, so may be relevant.

Menu will display body control systems available for the technician to diagnose. Select appropriate body system to be tested. DRB-II will then display a menu for specific system being tested. The following functions can be accessed from each system menu:

SYSTEM TESTS

This function allows the technician to determine whether the Single Board Engine Controller (SBEC) is active over the CCD bus.

READ FAULTS

This functions allows technician to read faults.

STATE DISPLAY

This function allows the technician to read states or values of a variety of sensors, inputs/outputs and components.

ACTUATOR TESTS

This function allows technician to activate various outputs, motors and relays to test their operation.

ADJUSTMENTS

This function allows technician to change vehicle theft alarm system mode from disarmed to armed or to put alarm system in self-diagnostics mode. Adjustments function is not available for testing of other body control modules.