Power Mirror Switch Test
Using ohmmeter, check continuity between power mirror switch connector pins with switch in designated position. See POWER MIRROR SWITCH CONTINUITY TEST . See Fig 1 .
POWER MIRROR SWITCH CONTINUITY TEST
| Switch Position (Mirror Angle) | (1) Continuity Between Pins | |||
|---|---|---|---|---|
| Mirror Selector In Left Position | ||||
| Up | 3 & 6; 4 & 5 | |||
| Down | 3 & 5; 4 & 6 | |||
| Left | 3 & 5; 2 & 4 | |||
| Right | 2 & 3; 4 & 5 | |||
| Mirror Selector In Right Position | ||||
| Up | 1 & 3; 4 & 5 | |||
| Down | 3 & 5; 1 & 4 | |||
| Left | 3 & 5; 4 & 7 | |||
| Right | 3 & 7; 4 & 5 | |||
|
||||