Torque Specifications
WARNING: This page is about a different variant/trim than selected.
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |||
|---|---|---|---|---|
| Clutch Release Cylinder Mounting Bolt | 11-16 (15-22) | |||
| Clutch Release Cylinder-To-Union Bolt | 18 (24) | |||
| Flywheel-To-Crankshaft Bolt | 94-101 (127-137) | |||
| Lower Ball Joints-To-Knuckle Nut | 43-52 (58-71) | |||
| Mounting Bracket-To-Transaxle Bolt | 43-58 (58-79) | |||
| Pressure Plate-To-Flywheel Bolt | 11-16 (15-22) | |||
| Select Cable-To-Transaxle Bolt | 11-16 (15-22) | |||
| Shift Cable-To-Transaxle Bolt | 11-16 (15-22) | |||
| Starter Bolt | 20-25 (27-34) | |||
| Tie Rod End-To-knuckle Bolt | 17-25 (23-34) | |||
| Transaxle Case-To-Engine Block | ||||
| 8-mm Bolt | (1) | |||
| 10-mm Bolt | 22-25 (30-34) | |||
| 12-mm Bolt | 32-39 (43-53) | |||
| Wheel Lug Nut | 87-101 (118-137) | |||
| INCH Lbs. (N.m) | ||||
| Clutch Master Cylinder Mounting Nut | 84-133 (9.5-15.1) | |||
| Select Cable-To-Body Bolt | 80-124 (9-14.1) | |||
| Shift Cable-To-Body Bolt | 80-124 (9-14.1) | |||
| Undercover Bolt | 80-115 (9-13) | |||
|
||||