Receiver Dryer: Service and Repair

CAUTION: When installing new receiver-drier do not leave open to atmosphere for a long period of time. Receiver-drier contains moisture absorbing materials which will absorb moisture in the atmosphere.

REMOVAL
1. Remove refrigerant from A/C system using a refrigerant recovery machine.
2. Remove condenser bolt from module.
3. Remove receiver drier nut from condenser.
4. Remove receiver drier quick connect clip and disconnect quick connect (liquid line to receiver-drier).
5. Remove receiver-drier from vehicle.
6. Cap liquid line and condenser threaded fitting while system is open to prevent moisture from entering system.

INSTALLATION
For installation, reverse the above procedures.