LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Eagle >> 1995 >> Summit DL >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Engine Controls - Tests W/Codes) >> Self-Diagnostic System >> Entering On-Board Diagnostics >> Using Scan Tool
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Using Scan Tool

WARNING: This page is about a different car, the 1996 Mitsubishi Diamante, 1996 Mitsubishi 3000GT, and 1996 Dodge Stealth. However, it is still accessible from the selected car via links, so may be relevant.
  1. Refer to manufacturer's operation manual for instructions in use of scan tool. Before entering on-board diagnostics, see SERVICE PRECAUTIONS  . Locate Data Link Connector (DLC) under instrument panel, near steering column.
  2. Turn ignition switch to OFF position. Connect scan tool to DLC. Turn ignition switch to ON position. Read and record scan tool self-diagnostic output. Proceed to DIAGNOSTIC TROUBLE CODES (DTCS)  .
scientia non olet · About LEMON Manuals