Power Mirror Switch Test
Using ohmmeter, check continuity between power mirror switch connector pins with switch in designated position. See POWER MIRROR SWITCH CONTINUITY TEST . See Fig 1 . If continuity is not as specified, replace power mirror switch.
POWER MIRROR SWITCH CONTINUITY TEST
| Switch Position (Mirror Angle) | (1) Continuity Between Pins | |||
|---|---|---|---|---|
| Mirror Selector In Left Position | ||||
| Up | 10 & 5; 3 & 4 | |||
| Down | 10 & 4; 3 & 5 | |||
| Left | 10 & 4; 3 & 11 | |||
| Right | 10 & 11; 3 & 4 | |||
| Mirror Selector In Right Position | ||||
| Up | 10 & 9; 3 & 4 | |||
| Down | 10 & 4; 3 & 9 | |||
| Left | 10 & 4; 3 & 8 | |||
| Right | 10 & 8; 3 & 4 | |||
|
||||