Power Window Relay Test
- Remove power window relay from fuse/relay block located under dash panel at left side of vehicle. See Fig 1
. Check continuity between power window relay terminals No. 1 and No. 3. Continuity should be present.
- Connect positive lead of a 12-volt test battery to power window relay terminal No. 1, and negative lead of test battery to terminal No. 3. See Fig 2
. Continuity should be present between terminals No. 4 and No. 5 with voltage applied. Replace power window relay if continuity is not as specified.
Courtesy of CHRYSLER CORP.
Courtesy of CHRYSLER CORP.