Alignment Specifications
WARNING: This page is about a different car, the 1995 Dodge Intrepid. However, it is still accessible from the selected car via links, so may be relevant.
WHEEL ALIGNMENT SPECIFICATIONS
| Application | Preferred | Range |
|---|---|---|
| Camber (Degrees) Front | 0 | -0.6 to 0.6 |
| Camber (Degrees) Rear | -0.1 | -0.6 to 0.4 |
| Caster (Degrees) Front | 3 | 2 to 4 |
| Caster (Degrees) Rear | N/A | N/A |
| Toe-In (Inches) Front | 0.1 | 0 to 0.2 |
| Toe-In (Inches) Rear | 0.05 | -0.1 to 0.2 |
| Toe-In (Millimeters) Front | 2.5 | 0 to 5 |
| Toe-In (Millimeters) Rear | 1.5 | -2.5 to 5 |
| Toe-In (Degrees) Front | 0.2 | 0 to 0.4 |
| Toe-In (Degrees) Rear | 0.1 | -0.2 to 0.4 |
| Wheelbase (Inches) | 113 | N/A |
| Wheelbase (Millimeters) | 2870 | N/A |