LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Eagle >> 1996 >> Talon TSi, AWD, Standard >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul - Turbo >> Miscellaneous Controls >> Power Steering Pressure Switch >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Power Steering Pressure Switch: Installation

  1. To install, reverse removal procedure using NEW "O" ring. Coat "O" ring with Mopar Plus 7176 ATF before installing.
  2. Ensure spring is installed with large end facing upward, toward terminal side of switch. See Fig 1. Tighten power steering pressure switch to specification. See TORQUE SPECIFICATIONS .
Fig 1: Installing Power Steering Pressure Switch
G96F01686Courtesy of CHRYSLER CORP.
scientia non olet · About LEMON Manuals