Model 128 & X1/9 Front
Place front wheels in straight-ahead position. If toe-in is not within specifications, loosen sleeve locking nut on tie rods. To adjust, rotate hexagon on ball pin to set toe-in to specifications. Hold hexagon in position and lock nut against tie rod sleeve.
WHEEL ALIGNMENT SPECIFICATIONS
| Application | Caster (Degrees) | Camber (Degrees) | Toe-In (Inches) | Toe-Out On Turns (Degrees) | ||
|---|---|---|---|---|---|---|
| Inner | Outer | |||||
| Model 124 | ||||||
| Sedan & Wagon | 2 2/3±1/2 | 1/4±1/2 | 13/64 to 23/64 | .... | .... | |
| Sport Coupe | 3±1/2 | 1/4±1/2 | 13/64 to 23/64 | .... | .... | |
| Sport Spider | 3 1/6±1/2 | 1/6±1/2 | 5/32 to 5/16 | .... | .... | |
| Model 128 Front | ||||||
| Sedan & Wagon | 1 2/3±1/2 | 1 2/3±1/2 | -1/8 to 3/64 | .... | .... | |
| Sport L | 1 2/3±1/2 | 1 1/3±1/2 | -1/16 to 3/32 | .... | .... | |
| Model 128 Rear | ||||||
| Sedan | .......... | -1/6±1/2 | 1/16 to 7/32 | .... | .... | |
| Wagon | .......... | 1/3±1/2 | 1/16 to 7/32 | .... | .... | |
| Sport L | .......... | -1 1/6±1/2 | 5/64 to 15/64 | .... | .... | |
| Model X1/9 | ||||||
| Front | 7±1/2 | -1/2±1/2 | 5/64 to 15/64 | .... | .... | |
| Rear | ..... | -1 2/3±1/2 | 5/32 to 15/64 | .... | .... | |