LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Fiat >> 2012 >> 500 Abarth >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules (Service Information) >> Standard Procedure >> Program The CTM (Convergence Telematics Module)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Program The CTM (Convergence Telematics Module)

When replacing any module, note the replacement and programming order. For more information, refer to MODULE REPLACEMENT AND PROGRAMMING ORDER GUIDE .

After verifying the proper replacement and programming order, follow the steps below to program the CTM.

  1. Connect the scan tool.
  2. Check vehicle for DTCs.
  3. Clear all stored DTCs.
  4. Turn car OFF then ON and confirm DTCs are gone.
  5. Go to CTM >> Misc. Functions >> Proxi Alignment

If required, continue to programming the next module.

scientia non olet · About LEMON Manuals