LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Fiat >> 2013 >> 500e >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules - (Service Information) - 500E >> Standard Procedure >> Program The Pcm (Powertrain Control Module)
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Program The Pcm (Powertrain Control Module)

  1. Connect the scan tool.
  2. Check vehicle for DTCs.
  3. Clear all stored DTCs.
  4. Turn car OFF then ON and confirm DTCs are gone.
  5. Perform the PCM/ECM PROGRAMMING procedure using appropriate manufacturer data. and.

If required, continue to programming the next module.

scientia non olet · About LEMON Manuals