TPMS Sensor Programming
After a sensor has been replaced, the TPM module automatically learns and stores the sensor IDs after the vehicle has been driven for up to 20 minutes continuously above 15 mph (24 km/h). The learning sequence initiates automatically when the vehicle has been stopped for more than 20 minutes.
NOTE:
A new sensor ID can also be programmed directly into the TPM module by using a RKE-TPM Analyzer in conjunction with a Scan Tool. Once the new sensor ID has been programmed, the vehicle will need to be driven above 15 mph until the fault is no longer active (lamp extinguishes) and display is updated (for up to 20 minutes). Using a TPM-RKE Analyzer can take up to a minute to force a transmission from a sensor.