LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Fiat >> 2017 >> 124 Spider Classica, Automatic Trans >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Front Suspension & Wheel Alignment >> Wheel Alignment >> Technical Specifications >> Specifications
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Technical Specifications: Specifications

FRONT SPECIFICATIONS 

NOTE:

This check procedure must be carried out after each operation on the mechanical components of the front suspension since it defines the position of the wheels in relation to the body (e.g.: control arms, struts, shock absorbers, springs etc.).

The wheel geometry/angle checks must be carried out using appropriate optical equipment after checking and adjusting tire inflation pressure to the prescribed values and ensuring that the car complies with one of the following load conditions:

RIDE HEIGHT

Measurement Value
Ride Height 368 - 376 mm (14.49 - 14.80 in.)
FRONT TOE

Measurement Value
Total Toe 1.1 ± 2.8 mm (0.15° ± 0.33°)
FRONT CAMBER

Measure Value (Degrees)
Camber Front Wheels, Vehicle Height 350 - 358 mm (13.78 - 14.09 in.) - 0.50°
Camber Front Wheels, Vehicle Height 359 - 367 mm (14.13 - 14.45 in.) - 0.30°
Camber Front Wheels, Vehicle Height 368 - 376 mm (14.49 - 14.80 in.) - 0.12°
Camber Front Wheels, Vehicle Height 377 - 385 mm (14.84 - 15.16 in.) 0.03°
Camber Front Wheels, Vehicle Height 386 - 394 mm (15.20 - 15.51 in.) 0.13°
FRONT CASTER

Measure Value (Degrees)
Caster Front Wheels, Vehicle Height 350 - 358 mm (13.78 - 14.09 in.) 8.30°
Caster Front Wheels, Vehicle Height 359 - 367 mm (14.13 - 14.45 in.) 8.07°
Caster Front Wheels, Vehicle Height 368 - 376 mm (14.49 - 14.80 in.) 7.85°
Caster Front Wheels, Vehicle Height 377 - 385 mm (14.84 - 15.16 in.) 7.63°
Caster Front Wheels, Vehicle Height 386 - 394 mm (15.20 - 15.51 in.) 7.40°

REAR SPECIFICATIONS 

RIDE HEIGHT

Measurement Value
Ride Height 366 - 374 mm (14.41 - 14.72 in.)
REAR TOE

Measurement Value
Total Toe 16 in. Wheels 2.0 ± 2.8 mm (0.28° ± 0.33°)
Total Toe 17 in. Wheels 2.1 ± 2.8 mm (0.28° ± 0.33°)
REAR CAMBER

Measure Value (Degrees)
Camber Rear Wheels, Vehicle Height 348 - 356 mm (13.70 - 14.02 in.) - 1.38°
Camber Front Wheels, Vehicle Height 357 - 365 mm (14.06 - 14.37 in.) - 1.15°
Camber Front Wheels, Vehicle Height 366 - 374 mm (14.41 - 14.72 in.) - 0.95°
Camber Front Wheels, Vehicle Height 375 - 383 mm (14.76 - 15.08 in.) - 0.77°
Camber Front Wheels, Vehicle Height 384 - 392 mm (15.12 - 15.43 in.) - 0.62°