LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Fiat >> 2018 >> 124 Spider Classica, Automatic Trans >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Electronic Control Modules (Service Information) >> Module, Passive Entry (PEM) >> Removal And Installation >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal And Installation: Removal

  1. Disconnect and isolate the negative battery cable.
  2. Remove the side cowl trim panel. Refer to PANEL, COWL TRIM, SIDE, REMOVAL AND INSTALLATION .
    GC0176198Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the Passive Entry Module (PEM) wiring harness connector.
  4. Pull out the PEM (2a) disengaging it from the retainers (2b) on the mounting bracket (2c).
scientia non olet · About LEMON Manuals