Removal And Installation

WARNING: This page is about a different car, the 2019 Fiat 500X. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

If this Electronic Control Unit (ECU) is being replaced with a new unit, a diagnostic scan tool MUST be used to determine if alignment of the PROXI configuration data into the new ECU is needed. If PROXI alignment is needed, follow the routine outlined in the diagnostic scan tool for "PROXI Configuration Alignment" under the Body Control Module (BCM) "Misc. Functions" menu.

NOTE:

If this ECU is being replaced with a new unit, use a diagnostic scan tool to perform the Flash Programming Procedure (if available). This will confirm that the module is updated to the latest applicable software level.

For the removal and installation of the Anti-lock Brake System (ABS) Module. Refer to INTEGRATED CONTROL UNIT (ICU), REMOVAL AND INSTALLATION .