LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Fiat >> 2020 >> 500L Lounge >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (Electronic Control Modules (Service Information)) >> Module, Keyless Entry Receiver >> Removal And Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal And Installation

WARNING: This page is about a different car, the 2020 Fiat 124 Spider. However, it is still accessible from the selected car via links, so may be relevant.

REMOVAL 

  1. Disconnect and isolate the negative battery cable.
  2. Remove the soft top side housing lining. Refer to ASSEMBLY, FOLDING TOP, REMOVAL AND INSTALLATION .
    GC0176279Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the wire harness connector (1).
  4. Remove the screw (2a) and remove the keyless entry receiver (2b).

INSTALLATION 

  1. Position the keyless receiver to the vehicle and tighten the screw.
  2. Connect the wire harness connector.
  3. Install the soft top side housing lining. Refer to ASSEMBLY, FOLDING TOP, REMOVAL AND INSTALLATION .
  4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals