LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Fiat >> 2020 >> 500L Pop >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Electronic Control Modules (Service Information)) >> Module, Door (DDM/PDM) >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Module, Door (DDM/PDM): Removal

WARNING: This page is about a different car, the 2020 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.
GC0139118Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the trim panel from the inside of the front door (1). Refer to PANEL, DOOR TRIM, REMOVAL .
  3. Disconnect each of the electrical connectors (3) from the connector receptacles of the door control module (2).
  4. Remove the fasteners (4) that secure the door control module to the front door hardware module carrier.
  5. Remove the door control module from the door hardware module carrier.
scientia non olet · About LEMON Manuals