LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Fiat >> 2020 >> 500L Pop >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Electronic Control Modules (Service Information)) >> Module, Hands Free (HFM) >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Module, Hands Free (HFM): Installation

WARNING: This page is about a different car, the 2020 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.
GC0157480Courtesy of CHRYSLER GROUP, LLC
NOTE:

The Hands Free Module (HFM) (1) is mounted above the steering column (3) and against the dash panel (4) to the underside of the instrument panel column support bracket.

  1. Position the HFM (1) above the steering column (3) and close enough to the dash panel (4) to access and reconnect the three wire harness connections (5) to the module connector receptacles.
  2. Position the HFM to the underside of the instrument panel column support bracket.
  3. Install and tighten the fasteners that secure the HFM to the underside of the instrument panel column support bracket. Tighten the screws securely.
  4. Reinstall the brake pedal assembly (1) to the dash panel. Refer to PEDAL(S), BRAKE AND/OR ACCELERATOR, INSTALLATION .
  5. Reinstall the knee blocker to the instrument panel steering column opening. Refer to KNEEBLOCKER, INSTALLATION .
  6. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
scientia non olet · About LEMON Manuals