Quick Test: Description

The QUICK TEST diagnostic procedure is a functional test of the EEC-IV system. It consists of 7 basic test steps. These basic steps must be carefully followed in sequence, otherwise misdiagnosis, or replacement of non-faulty components may result.

• VISUAL CHECK & VEHICLE PREPARATION
• EQUIPMENT HOOK-UP
• KEY ON ENGINE OFF (KOEO) SELF-TEST
• COMPUTED TIMING CHECK
• KEY ON ENGINE RUNNING (KOER) SELF-TEST
• CONTINUOUS MONITOR MODE (WIGGLE TEST)
• DIAGNOSIS BY SYMPTOM

After all tests, servicing, or repairs have been completed, repeat QUICK TEST to ensure all EEC-IV systems work properly.