Tightening Specifications
| Lower Intake Manifold to Cylinder Head | Step 1 | - Hand start and snug nuts at positions 3 and 4. |
| Step 2 | 4-8 Newton Meter (Nm) | |
| Step 3 | 8-15 Newton Meter (Nm) | |
| Step 4 | 15-21 Newton Meter (Nm) | |
| Step 5 | 21-25 Newton Meter (Nm) Repeat after warm up. | |
| Lower Intake Manifold Stud to Cylinder Block | 14-16 Newton Meter (Nm) | |
| Fuel Supply Manifold to Lower Intake Manifold | 8-11 Newton Meter (Nm) | |
| Upper Intake Plenum | Step 1 | 10 Newton Meter (Nm) |
| Step 2 | 21-25 Newton Meter (Nm) | |
| Throttle Body to Upper Intake Plenum | 8-11 Newton Meter (Nm) |